PS2V-12 Variable Power Supplies
12V dc Adjustable-Output Power Supplies for Banner Lights
Features
• Provides two independently-adjustable channels of selectable 4 to 12V dc (manual)
or 7 to 12V dc (analog) power; up to 2A per channel
• Supplies power to two separate Banner continuous LED lights, or to one light
requiring two power sources
• Output voltage may be controlled manually, or by using external analog signal
• 90 to 264V ac input
Models
Power
Input
Power
Input Cords
Analog Input
Connections
Output
Connections
Models
Outputs (dc)
90 to 264V ac
47 to 440 Hz
1.5 A
PS2V-12†
2 A max. each channel
9-pin male
D-subminiature
9-pin female
D-subminiature
1.8 m
(6') cable
Two output options:
• 4 to 12V dc manual knob
• 7-12V dc analog input
(see hookups on back page)
(see hookups on back page)
90 to 264V ac
PS2V-12E† 47 to 440 Hz
0.9 A
† These models are not stocked and are non-returnable
Specifications
Adjustment
Switch used to change output voltage control from manual to analog input;
Two lockable knobs for manual control of output voltage
Analog Input
0 to 10V dc, 10 mA max.
Painted steel enclosure
IEC IP20; NEMA 1
Construction
Environmental Rating
Operating Conditions
Temperature: +5° to 40°C (+41° to 104°F)
Max. Relative Humidity: 95% (non-condensing)
Printed in USA
11/05
P/N 67449 rev. B
|